1、With fine atomization nozzles, large filter area, good atomization effect, energy saving and water saving. 2、According to different usage scenarios and effect requirements, the appropriate aperture size can be selected to make the fog effect system work. 3、This nozzle can completely use the pressure of tap water for atomization, and the effect will be better when a high‑pressure water pump is used. 4、Low‑pressure spray system can be used for landscaping, cooling, air humidification, dust reduction, deodorization, and air purification. 5、Suitable for cold storage, greenhouse, livestock breeding, flower nursery cultivation, freshing fruits and vegetables, anti‑static, haze prevention, humidification and cooling. 6、Suitable for humidifyng and cooling in textile factory, electronics factories, paper factory, printing factory, automobile factory, wood processing plants, power plants, steel mills, brewing, and food industries.
Specification
Condition: Brand New
Item Type: Garden Cooling System
Material: PE
Diaphragm Pump:
Power: 60W
Pressure: 0.8Mpa
Water Flowing: 5L/Min
Weight: Approx. 1552g / 54.7oz
Hose Total Length: Approx. 12m / 39.4ft
Application:
1. Wetting And Removing Rust
2. Air Humidification
3. Chemical Treatment
4. Chemical Spraying
5. Liquid Spraying
6. Leaf Humidification
7. Tablet Coating
8. Flue Gas Evaporative Cooling
9. Cleaning
10. Component Cooling
11. Fruit Wax Spray
12. Glazing Tiles
13. Factory Humidification
14. Salt Spray Test
15. Artificial Fog
16. Humidification in Other Places
Installation Steps:
1. It is recommended to install the atomization system at a height of 2.5m-3m.
2. Turn on the faucet to clean the system for 1 minute to clean the impurities in the system.
3. Screw the spray nozzle to the tee fitting, except for the one at the end.
4. Turn on the faucet to clean the system for 2 minutes to sure that the system is completely cleaned.
6. Fix the atomization pipe with the provided cable tie saddle clamp.
7. Connect one end of the supplied water inlet pipe to the water inlet of the pump, and put the other section into the bucket.
8. Connect the water outlet pipe to the water outlet of the pump. The arrows on the pump cover points to the direction of the water outlet.
9. Turn on the power of the water pump until the sprayer works and enjoy the cooling atomization system.
10. When the atomization system is not used for a long time, close the nozzle and keep it dry and clean.
Package List
1 x 12V Diaphragm Pump
1 x Household Power Adapter
1 x Assembly Accessory (Inlet Pipe + Filter + Anti-Floating Device)
1 x Pump Inlet 90 Degree Elbow
1 x Handle Clamp
1 x G1/4 Spraying Hose (Totally 12m / 39.4ft)
16 x Copper Sprayer
16 x Sprayer Base
1 x Hose End Plug
40 x Hose Buckle
40 x Hose Strap
2 x Sealing Tape
1 x G1/2 to G1/4 Adapter
Note
1.Please allow 0‑1 inch error due to manual measurement. Thanks for your understanding.
2.Monitors are not calibrated same, item color displayed in photos may be showing slightly different from the real object. Please take the real one as standard.

Products received faulty, damaged, or not as described are eligible for a return, refund, or replacement in accordance with local consumer laws. We are committed to ensuring all products meet the standards of quality and reliability expected by our customers. Please note that we do not accept returns or provide refunds for change of mind. We encourage you to carefully consider your purchase to ensure it meets your needs and expectations.