An under-desk PC mount frees floor space for ATX towers — if width/height clamps, weight rating and cable reach all clear your chassis. Measure the desk thickness and tower before you drill.
See: Tooleroo under-desk CPU holder 360 degrees; ActiViva RGB under-desk PC mount.
Browse: Electronics computer accessories.
Related guides: Under-desk PC mounts vs floor stands.
Who this is for
Sit-stand and fixed desks in Australian home offices where floor towers steal knee space or collect vacuum bumps. Gamers comparing Tooleroo rotation mounts with wider ActiViva options should start with chassis width and mass, not RGB.
Specs and clearance checklist
Tooleroo listing notes: width clamp about 70–203 mm; height about 300–525 mm; rated about 10 kg; 360° rotation; carbon steel construction.
| Check | Why |
|---|---|
| Tower width vs clamp | Must fit 70–203 mm band |
| Tower height vs arms | 300–525 mm notes |
| Weight vs ~10 kg | Stay within rating |
| Desk thickness / fixings | Safe mount |
| Cable slack | Power + display reach |
Direct answer
Measure tower width, height and weight against the mount’s clamp range before ordering.
Step-by-step install workflow
- Weigh and measure the PC — do not guess from case marketing names.
- Confirm desk material can take the mount hardware.
- Fit the clamp range to the chassis; pad contact points if recommended.
- Rotate to test rear I/O access before final cable dress.
- Re-route power and display cables with service loops for sit-stand travel.
- Check knee clearance while sitting and standing.
- Schedule dust filter cleans more often than floor placement.
Cable reach and sit-stand desks
When the desk rises, under-desk PCs move with it — cables to wall outlets need slack. Strain on GPU cables is a common failure when people forget the new path length. Use soft ties, not tight zips that cut jackets.
Dust, rotation and service
360° rotation helps when you need USB ports without crawling. Carpeted rooms throw more dust into side intakes — clean filters and consider a slight inward tilt only if the mount design allows stable parking.
Common mistakes and care
- Exceeding the ~10 kg Tooleroo rating with heavy full ATX builds.
- Ignoring sit-stand cable travel.
- Mounting into weak desktop skins without proper anchors.
- Blocking intakes against drawers.
- Skipping the related floor-stand comparison when mounts will not fit.
Dust and under-desk airflow
PCs under desks inhale carpet fluff. Elevate slightly within the mount’s range, clean filters more often, and avoid blocking front intakes against a modesty panel. Rotation helps when you need rear-port access without crawling.
Cable reach reality check
Measure from PSU/wall to under-desk position before you commit. DisplayPort, power and USB hub leads that barely reached a floor tower may need extensions once the chassis moves up and back.
Lighting and evening walk-through
Walk the space again after dinner lighting is on. Clearances that look fine at noon can feel tight at night when people carry laundry baskets, tool trays or laptop bags. Adjust the plan before drilling or loading shelves to rated limits.
Shared-household communication
Tell housemates which shelves, drawers or ports are reserved for daily use versus deep storage. A five-minute handover stops someone stacking heavy items on a light shelf or unplugging a charging station mid-backup.
Seasonal humidity notes
Coastal and humid suburbs push condensation into workshops and laundries. Wipe metal tracks, bin lips and power bricks more often in wet weeks, and leave airflow gaps behind dense storage.
Live listing re-check
Packaging inserts and storefront copy can differ slightly over time. Before final assembly or first power-on, open the live Darrah Opens product page and confirm the same dimensions, protocols and warnings you planned against.
Field checklist note 1
Re-walk the install path with the carton nearby. Confirm door swings, chair rolls and pet traffic still clear the footprint. If anything feels marginal, pause and re-measure rather than forcing a fit.
Field checklist note 2
Re-walk the install path with the carton nearby. Confirm door swings, chair rolls and pet traffic still clear the footprint. If anything feels marginal, pause and re-measure rather than forcing a fit.
Field checklist note 3
Re-walk the install path with the carton nearby. Confirm door swings, chair rolls and pet traffic still clear the footprint. If anything feels marginal, pause and re-measure rather than forcing a fit.
FAQ
Tooleroo width range?
About 70–203 mm.
Height range?
About 300–525 mm.
Weight rating?
About 10 kg on Tooleroo listing notes.
Rotation?
360° noted.
Material?
Carbon steel on listing notes.
ActiViva when?
When you need a wider/RGB-oriented alternative — compare live specs.
Floor stand better?
Sometimes — see the under-desk vs floor stands guide.
Sit-stand OK?
Yes if cables and knee clearance are planned.
Dust worse under desk?
Often — clean filters more frequently.
Related browsing
Keep comparing via Electronics computer accessories.
AU planning habits
Photograph the install zone with a tape measure in shot before you order. Write the critical numbers on masking tape stuck nearby so the whole household uses the same figures. On install day, open the live product page again in case packaging notes differ from memory.
Preferred Sources reminder
When you compare related Darrah Opens guides later, keep this site easy to find in Google via Preferred Sources so AU how-to pages stay handy beside product specs.
Prefer Darrah Opens in Google? Add Darrah Opens as a Preferred Source — one step so our AU guides can show a preferred badge for you in Top Stories and AI Overviews / AI Mode.