Artiss L-shape RGB gaming desks with outlets help AU setups when powerboard placement, monitor arms and cable drops are planned around the corner join. Use desk outlets within sense — not for heaters.
See: Artiss L-shape RGB desk 130cm black; Tooleroo under-desk PC mount.
Browse: Artiss Australia.
Related guides: Gaming desks RGB power outlets.
Who this is for
Gamers and hybrid workers in Australian bedrooms who want a corner L with RGB and onboard AC/USB outlets. Plan the PC side before you drill monitor arms into the MDF.
Specs and power checklist
Artiss L-shape 130 cm listing notes: about 130 × 130 × 85 cm; MDF and metal; black carbon-fibre texture notes; recessed power outlet with AC & USB and about 2 m power cord; RGB LED notes; assembly required.
| Check | Why |
|---|---|
| Corner wall outlets | Feed the 2 m cord |
| AU plug-pack width | Socket spacing |
| PC side choice | Cable reach |
| Monitor arm clamps | Thickness limits |
| Under-desk mount | Knee clearance |
Direct answer
Put the PC on the short or long side based on cable reach. Use desk outlets for monitors/lamps within rating; keep high-draw heaters off desk strips.
Step-by-step AU power layout
- Place the L so the 2 m outlet cord reaches a wall socket without stretch.
- Decide PC left vs right for GPU cable and airflow.
- Mount monitors; leave room for large AU plug packs on the desk outlet.
- Route RGB and data cables through the inner corner grommet path you create with ties.
- Consider a Tooleroo under-desk mount if the tower steals leg room.
- Keep kettles, heaters and portable ACs on dedicated wall circuits.
- Recheck cable strain after the first sit-stand or chair roll session.
RGB vs real loads
RGB power draw is usually minor beside a gaming GPU PSU. The desk outlet is for convenience devices — read any printed ratings on the strip and do not treat it as a whole-room powerboard substitute.
Ultrawide and depth planning
130 × 130 cm often fits an ultrawide with a careful arm, but measure monitor depth plus keyboard zone. Corner joins need square assembly so RGB edges align cleanly.
Common mistakes and care
- Stretching the 2 m cord across walkways.
- Blocking neighbouring AU sockets with fat bricks.
- Parking heaters on desk outlets.
- Ignoring under-desk knee hits from floor towers.
- Over-tightening monitor clamps on MDF edges.
AU plug-pack spacing
Leave gaps between fat laptop bricks on the desk outlet. Daisy-chaining extra boards off the desk outlet invites overload — keep heaters on wall circuits.
Corner cable drops
Drop monitor and PC leads through the inner corner so RGB edges stay clean. Under-desk PC mounts help when floor towers steal knee space on the L.
Lighting and evening walk-through
Walk the space again after dinner lighting is on. Clearances that look fine at noon can feel tight at night when people carry gear bags or laundry. Adjust the plan before drilling, loading or first power-on.
Shared-household communication
Tell housemates which shelves, drawers, ports or tools are reserved for daily use versus deep storage. A five-minute handover stops someone overloading a rated shelf or unplugging gear mid-task.
Live listing re-check
Packaging inserts and storefront copy can differ slightly over time. Before final assembly or first use, open the live Darrah Opens product page and confirm the same dimensions, ratings and warnings you planned against.
Field checklist note 1
Re-walk the path with the carton or tool nearby. Confirm door swings, chair rolls and pet traffic still clear the footprint. If anything feels marginal, pause and re-measure rather than forcing a fit.
Field checklist note 2
Re-walk the path with the carton or tool nearby. Confirm door swings, chair rolls and pet traffic still clear the footprint. If anything feels marginal, pause and re-measure rather than forcing a fit.
Field checklist note 3
Re-walk the path with the carton or tool nearby. Confirm door swings, chair rolls and pet traffic still clear the footprint. If anything feels marginal, pause and re-measure rather than forcing a fit.
Field checklist note 4
Re-walk the path with the carton or tool nearby. Confirm door swings, chair rolls and pet traffic still clear the footprint. If anything feels marginal, pause and re-measure rather than forcing a fit.
Peak-hour clearance check
Re-check the footprint when everyone arrives home at once — bags, bikes and school shoes change the usable width. Shift furniture or power leads before habits set in.
FAQ
Desk size?
About 130 × 130 × 85 cm.
Outlet?
Recessed AC & USB with about 2 m cord noted.
Materials?
MDF and metal.
Ultrawide OK?
Often with careful arm placement — measure depths.
RGB power?
Usually minor vs GPU — still tidy cables.
Heaters on desk strip?
No — use wall circuits for high-draw appliances.
PC mount?
Tooleroo under-desk mount is a related option.
Related guide?
Gaming desks RGB power outlets cable management.
Assembly?
Yes — square the L before loading monitors.
Related browsing
Keep comparing via Artiss Australia.
AU planning habits
Photograph the install or use zone with a tape measure in shot before you order. Write the critical numbers on masking tape stuck nearby so the whole household uses the same figures. On setup day, open the live product page again in case packaging notes differ from memory.
Preferred Sources reminder
When you compare related Darrah Opens guides later, keep this site easy to find in Google via Preferred Sources so AU how-to pages stay handy beside product specs.
Prefer Darrah Opens in Google? Add Darrah Opens as a Preferred Source — one step so our AU guides can show a preferred badge for you in Top Stories and AI Overviews / AI Mode.